Products such as Ultimafloor a 2 pack water based low odour polyurethane wood lacquer for areas of high foot fall of traffic. D.1 Pro a solvent based product for horizontal as well as vertical surfaces for dense greasy hardwoods that are difficult to impregnate, suitable for exterior use due to its mildew resistant finish. Owatrol Professional products are suitable for use on a variety of surfaces, including glass and plastics, in addition to wood and metal. Ideal for interior use as it offers easy maintenance due to it not requiring sanding or stripping before re-application reducing down time especially important in areas such as stairs and hallways. The Technical Department at Promain will be happy to help with the specification of any of these products so please call them for further assistance.
Why Choose Owatrol Professional?
Since 2002, Owatrol Professional has earned the trust of painters, contractors, and home renovators. Promain supplies the full range of Owatrol coatings designed to deliver long-lasting results on both wood and metal surfaces. Whether you're working with oil based paints, protecting hardwood, or restoring rusted ironwork, Owatrol products improve paint adhesion, reduce roller marks, and extend the life of your finish.
Versatile Solutions for Wood and Metal
Promain’s stocked range includes specialist coatings for rusted metal parts and timber that needs long-term protection. These include paint rust inhibiting primers, penetrating rust inhibitor oils, and wood impregnation treatments. Each product works with both oil based and water based paints, and supports everything from component urethanes to chlorinated rubber systems. Whether you're applying primers or finishing coats, you can count on enhanced adhesion and better viscosity - without the risk of damaging thinners or peeling finishes.
Surface Preparation – The Foundation of a Lasting Finish
Achieving a professional, long-lasting finish starts with thorough surface preparation. Whether you’re working on wood or metal surfaces, taking the time to clean and treat each area ensures your coatings perform at their best and stand up to the elements.
For metal surfaces, it’s essential to remove all traces of dirt, grease, and especially rust. Use a wire brush or sandpaper to eliminate loose corrosion and reveal sound metal beneath. On heavily rusted surfaces, Owatrol Oil acts as a penetrating rust inhibitor - simply apply it directly to the affected area. The oil seeps deep into the rust, isolating the base metal and stopping further rusting by blocking out moisture and air. For firm rust, Owatrol Oil can be brushed on to create a tough, flexible barrier that protects ferrous metals, aluminium, zinc, and even fittings like hinges.
When it comes to wood, Owatrol Oil is equally versatile. It penetrates deep into the grain, providing wood impregnation that shields against moisture and weathering. This is especially important for outdoor wood surfaces exposed to rain, wind, and temperature changes. By sealing the wood, you maintain a natural look while ensuring long-term protection.
Owatrol Oil also excels as a paint conditioner for oil based paints. Mixing it into your paint improves paint flow, reduces roller marks, and enhances paint adhesion - even in challenging conditions like cold, heat, or windy weather. This means you can achieve a smooth, even finish on both primers and finishing coats, without relying on damaging thinners. The result is a rust inhibiting, heat resistant coating that protects metal parts and wood alike.
For painting projects involving metal parts such as hinges, fittings, or outdoor furniture, Owatrol Oil can be mixed with alkyd paint to create a rust-inhibiting layer that stands up to heat (up to 175°C) and harsh weather. Its excellent adhesion makes it suitable for a wide range of surfaces, from ferrous metals to aluminium and even previously painted areas.
Proper surface preparation with Owatrol Oil not only protects your investment but also provides an ideal foundation for any painting or coating system. Whether you’re applying primers or finishing coats, you’ll benefit from better viscosity, improved coverage, and a finish that maintains its quality over time.
For more details on how to use Owatrol Oil, including accepted payment methods and ordering information, visit our website. With Owatrol Oil, you can trust you’re using a high-quality, penetrating solution that delivers lasting protection and a professional result on every project.
Primafloor – Strong Finish for Interior Wood
Primafloor is a water-based, two-part polyurethane varnish made for floors that see heavy footfall. It offers excellent adhesion, dries quickly, and has minimal odour. You get a tough, scuff-resistant surface ideal for busy homes, schools, or offices. The formula bonds well to timber without leaving roller marks, creating a natural look with lasting strength.
D.1 Pro Honey Gold – For Dense Hardwood
D.1 Pro Honey Gold is a penetrating oil designed for hardwoods like teak, iroko, and mahogany. These timbers often reject traditional coatings, but D.1 Pro soaks deep into the grain. It leaves behind a mildew-resistant finish that doesn’t need sanding between coats. It’s particularly good in outdoor spaces where moisture and air exposure break down standard finishes quickly.
Teak-Olje – Bring Weathered Wood Back to Life
Teak-Olje is ideal for wood that’s turned grey from exposure. It revives colour and adds protection without forming a film on the surface. This oil offers excellent bonding and maintains a breathable finish, reducing flaking and blistering. It’s especially effective for wood impregnation on garden furniture, decking, and fencing.
Compo-Care – Refresh Composite Decking
Compo-Care restores colour to composite wood, especially in areas exposed to sun and windy conditions. It’s quick to apply, fast-drying, and retains the original texture of the material. For decks or cladding that look faded or tired, it’s a simple way to restore appearance and protect against future damage.
PCD 91 – Rust Inhibitor for Metal Surfaces
PCD 91 is a rust inhibitor and primer designed for use on firm rust and heavily rusted surfaces. It stabilises corrosion on ferrous metals and forms a solid base for finishing coats. It can be used with air drying alkyds, one component urethanes, and even oil based paints. PCD 91 works by sealing the base metal from moisture and air, helping paint stick and last longer. It’s also suitable for use under heat resistant coatings where needed.
Owatrol Oil – Improve Paint Flow and Bonding
Owatrol Oil is a paint conditioner made for use with oil based paints, and it can be mixed thoroughly into the paint to improve performance. It improves paint flow, prevents roller marks, and helps paints grip better to sound metal, wood, or previously painted surfaces. Mixing it into your paint improves paint flow, reduces roller marks, and enhances paint adhesion - even in challenging conditions like cold, heat, or windy weather. For best results, Owatrol Oil should be added at 5-20% by volume, depending on the paint and application. Owatrol Oil creates a bonding film that boosts paint durability and levels out finish for a cleaner look. It can be applied directly to surfaces such as rusted metal or wood without the need for extensive priming. In addition to brush and roller, Owatrol Oil can also be applied using a sprayer for a smooth, even coat on large surfaces.
Safer Formulas, Better Results
All Owatrol Professional products stocked by Promain are made for professional results without compromising on user safety. Low in harmful emissions and easy to apply, they reduce downtime while giving better coverage and longer intervals between coats. Whether you're treating metal parts or softwood, the range provides an ideal foundation for any project.
Technical Help from Promain
Promain’s expert team is available to help with product matching, estimating coverage, and choosing the right system. From rust stabilisers to wood impregnation oils, they’ll guide you through application and ongoing maintenance.
Order from Promain – Authorised Owatrol Distributor
Browse the featured products below, available for fast UK delivery and multiple accepted payment methods:
-
Teak-Olje: Restores greying outdoor timber and protects against weathering.
-
Primafloor: Tough polyurethane finish for interior wooden floors.
-
Compo-Care: Refreshes faded composite decking and cladding.
-
PCD 91: Penetrating rust inhibitor and primer for metal surfaces.
-
D.1 Pro Honey Gold: Long-lasting oil for hardwoods with a natural look.
Need help finding the right finish? Contact Promain for expert advice or place your order online today.