Centrecoat Thermoplastic Road Sign Bicycle Logo

Thermoplastic Bicycle Logo for Roads and Car Park Marking use instead of Line Paint.

Available in White in 1200mm

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Measurement

3. Select a Qty

As low as:

£28.58

Inc VAT £34.30

PRODUCT DETAILS

Thermoplastic Bicycle Logo is part of Promain's range of Thermoplastic pre-formed line products. Thermoplastic Disabled Logo produces a clean cut, permanent marking that can be driven over within minutes of application.

Best Uses

Thermoplastic Bicycle Logo can be used in conjunction with anti-slip traffic paint and is ideal for use in car parks, walkways, cycle lanes and new or reinstatement work on roads.

Application

Thermoplastic Bicycle Logo is easy to apply by placing the markings flat on the surface and sealed using a thermoplastic gas torch for a surface that can be walked over within minutes. Thermoplastic Bicycle Logo is available in 1200mm.

Surface and Environment

Thermoplastic Bicycle Logo can be used on a number of surfaces but works most effectively on concrete surfaces in an outdoor environment. The Thermoplastic Bicycle Logo is most suited to application to roads and walkways, where pedestrians and vehicle owners need to be warned of cyclists.

TECHNICAL

Thermoplastic Bicycle Logo for Roads and Car Park Marking
Easy to apply
A clean cut, permanent marking that can be driven over within minutes of application
Preformed Thermoplastic Logos are ideal for car parks, walkways, cycle lanes and new or reinstatement work on roads
Thermoplastic markings are laid to the road surface, heated and sealed using a blow torch
The use of tack adhesive primer is recommended when applying Logos to concrete or old/worn surfaces
Can be used in conjunction with Anti-Slip Traffic Paint.